Capabilities
Milling (4th Axis)
2D, 3D, 4th Axis CNC Equipped Milling. All Equipment is provided with the necessary complementary tooling.
- CNC Fadal 40x20x28 vertical mill with full 4th axis (x2)
- CNC Haas 3ss 40x20x25 vertical mill with full 4th axis and probing (x2).
- CNC Haas 2ss 30x16x20 vertical mill with full 4th axis and probing
- CNC Haas VFO-E 30x16x20 vertical mill
- CNC Comet 24x18x18 vertical mill.
- Supermax 48x32 Knee Mill equipped with Futaba Pullscale 2 axis NC servo drive
Lathe Services
Engine Lathes and CNC Lathes with up to 9" chucking.
- CNC: Akira Seiki SL30 horizontal turning center with an 8” chuck turning up to 15” in diameter and 25” in length with live tail stock, and miscellaneous collet heads.
- Wasino Engine Lathe turning up to 18” in diameter and 32” between centers. Complimentary tooling includes: Collet closer and collets, eight and ten inch chucks, and steady rest.
Parts Assembly
Consists of full mechanical assemblies in a dedicated assembly area, with a full arrangement of support tools such as air ratchets, production Helicoil installation tools, keenserts installation tools , hand tools, and torque wrenches. Standard hardware and some fasteners are stocked for quick turnaround on projects.
(CAD)(CAM) Engineering
We use the latest version of Master Cam to machine your simple to complex 2D, 3D and 4th axis parts. With master cam we have an integrated CAD system to stream line part creation, fixturing, and machining.
- Shop Floor Control, using E2 Shoptech software.
- Mastercam 2018
- Data Transfer of IGES-DXF-CAD-SLDS via E-Mail.
- Solid Works 2015
Services
Production
Large quantities and tight tolerances are no problem we are committed to quality procedures and have the dedication to exceed your production needs. Production is typically done on our CNC Mill and Lathes, we use the latest machining techniques to remove the highest level of cubic inches per minutes, lowering cost and saving time.
Prototyping
Prototype work is tackled with the best methods possible to be as cost effective for an on time delivery. Prototype parts can require manual or CNC equipment or a combination of both depending on the part. We have the experience, equipment, software, and the know how to get the job done right. Always working close to our customers to make your parts more cost effective.
Conventional Machining
Manual lathes and mills hold tight tolerance on simple low volume parts, and are cost effective alternative to a CNC mill or lathe, because of their shorter setup and no programming needed. Years of experience makes us a very competitive and cost effective choice. These methods are at the core of our machining practices.
Outside Processing
We have access to numerous off site resources including part grinding, EDM, heat treating, plating, painting, welding, honing, cleaning, and non destructive testing. Many other services can be incorporated into the parts if needed. If you have a special request like Boeing or NADCAP approved sources please make a note when submitting your quote and at the time of the P.O.Documentation & Inspection
